Circuit protection is a very important part of electronic device design, aimed at protecting circuits from damage caused by factors such as overvoltage, overcurrent, and overheating.
Categories：Product knowledge Date：2024-11-27 Hits：388 View »
The switching time determines the switching speed of the transistor, which has an on and off process corresponding to the on time.
Categories：Product knowledge Date：2024-11-27 Hits：407 View »
Controllable silicon, also known as thyristor, is a special electronic device that can control and protect circuits, and is widely used in the fields of power electronics therapy and control.
Categories：Product knowledge Date：2024-11-27 Hits：393 View »
The lightning protection and overvoltage protection measures are inadequate.
Categories：Product knowledge Date：2024-11-26 Hits：808 View »
Substances can be classified into conductors, semiconductors, and insulators based on their conductivity.
Categories：Product knowledge Date：2024-11-26 Hits：461 View »
Substances can be classified into conductors, semiconductors, and insulators based on their conductivity.
Categories：Product knowledge Date：2024-11-26 Hits：379 View »
The application range of diodes is very wide. As long as diodes have unidirectional conductivity, they can be used for rectification, limiting, protection, detection, clamping, and switching circuits. The following mainly introduces the applications of diodes in several aspects.
Categories：Product knowledge Date：2024-11-25 Hits：468 View »
A P1N1P2N2 four layer three terminal device based on silicon single crystal, created in 1957. Due to its characteristics similar to vacuum thyristors, it is internationally known as silicon crystal thyristors, abbreviated as thyristors.
Categories：Product knowledge Date：2024-11-25 Hits：502 View »
The quality of field-effect transistors can be easily judged using a multimeter The method is to use a multimeter to measure the resistance value between the electrodes of the field-effect transistor, and then compare it with the resistance value indicated in the manual.
Categories：Product knowledge Date：2024-11-25 Hits：388 View »
Under normal circumstances, there is only a very small current in a reverse biased PN junction. This leakage current remains constant until the reverse voltage exceeds a specific value, after which the PN junction suddenly begins to conduct with a large current.
Categories：Product knowledge Date：2024-11-23 Hits：868 View »
